![]() PLEASE NOTE: Do not press the button on the remote more than one time or the programming will not be successful. Within 5 seconds, push the LOCK button on the keyless remote.Insert key into ignition and turn to the ACC position.If this procedure is performed too fast or too slow the system will not enter programming mode. PLEASE NOTE: Withdraw key completely from ignition cylinder each time. You may need to insert and remove the key up to 10 or 12 times until your hazard lamps flash. Insert key into ignition (DON’T TURN) and remove it from the ignition key cylinder at least 6 times within 10 seconds (this will need to be done at approximately one second intervals). ![]() Close and lock all doors with the driver’s side power lock switch located on drivers door panel. ![]() ![]() Any remotes not used during this procedure will become inactive. Note: You must have all remotes on hand when performing this procedure. × 2003 Nissan 350Z Keyless Entry Remote Fob Programming Instructions ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |